The Max complex
Highly effective pH corrector, water hardness regulator.
To reduce the pH of water, to neutralize metal salts (Ca, Mg, etc.).
pH value and water hardness
|pH value and water hardness||Flow rate|
|pH 7 and hardness 5-7 mg-eq/l||10-20 ml per 100l of water|
|pH 8 and hardness 7-9 mg-eq/l||20-30 ml per 100l of water|
|pH 10 and hardness 10-12 mg-eq/l||30-40 ml per 100l of water|
Pre-check the changes in the pH and hardness of the water. Taking into account the measurement readings, determine the consumption rate of the drug «Complex Max» based on the above consumption rates. Add the preparation «Complex Max» directly to the sprayer tank into the water first, mix, then repeat measurements of the pH and water hardness, then add pesticides or agrochemicals to the water, mix and use the working solution as intended.
The drug «Complex Max» is able to reduce the pH value to 4.5. If the consumption rate of the drug is exceeded, the phytotoxicity does not increase and the pH does not decrease below 4.5. The drug does not react with pesticides and is not able to reduce their biological effectiveness. The drug does not increase foaming. «Complex Max» is not able to leave burns on unprotected areas of the skin.
When used in a tank mixture with adjuvants, it is recommended to use the activator «Aqva Silk-705», since other adjuvants lose their abilities under the action of acids or alkalis.
Classification of waters by Ph
|Water group||pH value|
|Strongly Acidic Up||To 3,0|
|Acidic||More than 3.0 to 5.0|
|Slightly acidic||More than 5.0 to 6.5|
|Neutral||More than 6.5 to 7.5|
|Slightly Alkaline||More than 7.5 to 8.5|
|Alkaline||More than 8.5 to 9.5|
|Highly alkaline||More than 9.5|